External: L5980 mm x W6670 mm x H 2550mm

Internal: L5748 mm x W6440 mm x H2300 mm

Closed: L5980 mm x W2300 mm x H2550

Galvanised steel frame construction with a contrasting cladding layout, using vertical panels to each end and horizontal panels along the sides to break up the form and give a more residential appearance. The DualX incorporates a double-expanding structure, increasing internal width while maintaining a compact transport length.

• Frame: Q355 galvanised steel

• Main floor members: 100 × 80 mm RHS, 2.5 mm wall thickness

• Secondary framing: 80 × 80 mm RHS

• Double-expanding side sections integrated into main structure

• Cladding: 27 mm metal panels

• Wall insulation: 50 mm EPS panels

• Roof insulation: 80 mm PU insulation

Steel-framed floor system designed for strength, insulation and a solid underfoot feel, finished with durable, low-maintenance internal surfaces consistent throughout the expanded living areas.

• Floor frame: Q355 galvanised steel

• Main floor members: 100 × 80 mm RHS

• Floor insulation: 100 mm PU insulation

• Subfloor: steel sheet base

• Finished flooring: 8 mm PVC plank flooring

• Internal wall lining: composite board system

• Ceiling lining: bamboo / wood fibreboard panels

The bathroom is a factory-built, fully integrated wet-area module constructed within the steel frame, using moisture-resistant materials and full-height wall linings designed for durability and easy cleaning. All plumbing and drainage are pre-installed to simplify on-site connection.

• Full-height bathroom wall system incorporating steel framing, internal waterproof lining, and marble-look wall panels

• Integrated wet-area floor with fall to floor waste and slip-resistant PVC flooring

• Vanity with ceramic basin, mixer tap, and under-bench storage

• Standard flush toilet with concealed plumbing

• Framed frosted-glass shower screen with stainless hardware

• LED ceiling light with integrated exhaust ventilation

• Electric hot water system located within bathroom

• Pre-plumbed hot and cold water services

• Pre-plumbed waste with dedicated greywater outlet ready for site connection

The DualX kitchen uses a compact L-shaped layout to maximise bench space while keeping the room open and practical. Increased cabinetry provides additional storage, with ventilation discreetly integrated into the ceiling to maintain clean lines.

Natural light from the window above the sink improves usability, and all services are pre-planned for straightforward appliance connection.

Inclusions:

• L-shaped kitchen layout

• Stone-effect, silica-free benchtop

• Integrated sink with mixer tap

• Wood-grain base cabinetry

• Overhead cabinetry for increased storage

• Range hood concealed within ceiling bulkhead

• Pre-plumbed water and waste

• Pre-wired power points

Windows are powder-coated aluminium casement and top-hung units, selected for durability, weather resistance and clean, modern lines. Glazing provides good natural light while maintaining thermal performance and privacy where required.

• Powder-coated aluminium frames

• Combination of casement and top-hung (awning-style) windows

• Fixed bathroom window with obscured glazing for privacy

External access is provided via full-height aluminium-framed glazed double doors.

• Dual aluminium-framed swing entry doors forming a glazing effect

• Secure locking hardware

• Interior timber-look hinged doors with stainless steel lever handle

The DualX is fully pre-plumbed internally, with all wet areas completed in-factory to minimise on-site works and simplify final connection. Plumbing is concealed within wall and floor cavities for a clean finish.

• Hot and cold water lines pre-installed to kitchen and bathroom

• Kitchen and bathroom fixtures pre-connected

• 50 mm greywater outlet pre-plumbed from kitchen and shower to a single external discharge point

• 100 mm toilet waste outlet pre-plumbed via floor connection

• Bathroom floor waste with integrated fall

• External connection points positioned for straightforward site hookup

Electrical systems are pre-wired and fitted in-factory, ready for licensed connection on site. Layout is designed for everyday residential use, with dedicated circuits to wet areas.

• Internal wiring completed to Australian electrical standards

• LED ceiling lighting installed throughout

• Power points to living, kitchen and bathroom areas

• Light switches and exhaust/ventilation controls pre-installed

• Bathroom fitted with combined lighting, ventilation and heating unit

• 3.5 kW reverse-cycle split-system air conditioner installed

• Wall-mounted air conditioning controller

• External power inlet provided for main electrical connection