External: L5980 mm x W4270 mm x H2650 mm
Internal: L5750 mm W4040 mm x H2300 mm
Closed: L5980 mm x W2300 mm x H2650 mm
Galvanised steel frame construction with a contrasting cladding layout, using vertical panels to each end and horizontal panels along the sides to break up the form and give a more residential appearance. The SoloX incorporates a single-expanding structure, increasing internal living width while maintaining a compact transport footprint.
Frame: Q355 galvanised steel
Main floor members: 100 × 80 mm RHS, 2.5 mm wall thickness
Secondary framing: 80 × 80 mm RHS
Single expanding side section integrated into main structure
Cladding: 27 mm metal panels
Wall insulation: 50 mm EPS panels
Roof insulation: 80 mm PU insulation
Steel-framed floor system designed for strength, insulation and a solid underfoot feel, finished with durable, low-maintenance internal surfaces consistent throughout the expanded living areas.
Floor frame: Q355 galvanised steel
Main floor members: 100 × 80 mm RHS
Floor insulation: 100 mm PU insulation
Subfloor: steel sheet base
Finished flooring: 8 mm PVC plank flooring
Internal wall lining: composite board system
Ceiling lining: bamboo / wood fibreboard panels
The bathroom is a factory-built, fully integrated wet-area module constructed within the steel frame, using moisture-resistant materials and full-height wall linings designed for durability and easy cleaning. All plumbing and drainage are pre-installed to simplify on-site connection.
Full-height bathroom wall system incorporating steel framing, internal waterproof lining, and marble-look wall panels
Integrated wet-area floor with fall to floor waste and slip-resistant PVC flooring
Vanity with ceramic basin, mixer tap, and under-bench storage
Standard flush toilet with concealed plumbing
Framed frosted-glass shower screen with stainless hardware
LED ceiling light with integrated exhaust ventilation
Electric hot water system located within bathroom
Pre-plumbed hot and cold water services
Pre-plumbed waste with dedicated greywater outlet ready for site connection
The SoloX kitchen uses a compact L-shape layout to maintain an open feel while providing practical bench space and storage. Natural light from the window above the sink improves usability, and all services are pre-planned for straightforward appliance connection.
Inclusions:
L-shape kitchen layout
Stone-effect, silica-free benchtop
Integrated sink with mixer tap
Wood-grain base cabinetry
Overhead cabinetry for increased storage
Pre-plumbed water and waste
Pre-wired power points
Windows are powder-coated aluminium casement and top-hung units, selected for durability, weather resistance and clean, modern lines. Glazing provides good natural light while maintaining thermal performance and privacy where required.
Powder-coated aluminium frames
Combination of casement and top-hung (awning-style) windows
Fixed bathroom window with obscured glazing for privacy
External access is provided via full-height aluminium-framed glazed double doors.
Dual aluminium-framed swing entry doors forming a glazing effect
Secure locking hardware
Interior timber-look hinged doors with stainless steel lever handles
The DualX is fully pre-plumbed internally, with all wet areas completed in-factory to minimise on-site works and simplify final connection. Plumbing is concealed within wall and floor cavities for a clean finish.
Hot and cold water lines pre-installed to kitchen and bathroom
Kitchen and bathroom fixtures pre-connected
50 mm greywater outlet pre-plumbed from kitchen and shower to a single external discharge point
100 mm toilet waste outlet pre-plumbed via floor connection
Bathroom floor waste with integrated fall
External connection points positioned for straightforward site hookup
Electrical systems are pre-wired and fitted in-factory, ready for licensed connection on site. Layout is designed for everyday residential use, with dedicated circuits to wet areas.
Internal wiring completed to Australian electrical standards
LED ceiling lighting installed throughout
Power points to living, kitchen and bathroom areas
Light switches and exhaust/ventilation controls pre-installed
Bathroom fitted with combined lighting, ventilation and heating unit
2.5 kW reverse-cycle split-system air conditioner installed
Wall-mounted air conditioning controller
External power inlet provided for main electrical connection
External: L5980 mm x W4270 mm x H2650 mm
Internal: L5750 mm W4040 mm x H2300 mm
Closed: L5980 mm x W2300 mm x H2650 mm
Galvanised steel frame construction with a contrasting cladding layout, using vertical panels to each end and horizontal panels along the sides to break up the form and give a more residential appearance. The SoloX incorporates a single-expanding structure, increasing internal living width while maintaining a compact transport footprint.
Frame: Q355 galvanised steel
Main floor members: 100 × 80 mm RHS, 2.5 mm wall thickness
Secondary framing: 80 × 80 mm RHS
Single expanding side section integrated into main structure
Cladding: 27 mm metal panels
Wall insulation: 50 mm EPS panels
Roof insulation: 80 mm PU insulation
Steel-framed floor system designed for strength, insulation and a solid underfoot feel, finished with durable, low-maintenance internal surfaces consistent throughout the expanded living areas.
Floor frame: Q355 galvanised steel
Main floor members: 100 × 80 mm RHS
Floor insulation: 100 mm PU insulation
Subfloor: steel sheet base
Finished flooring: 8 mm PVC plank flooring
Internal wall lining: composite board system
Ceiling lining: bamboo / wood fibreboard panels
The bathroom is a factory-built, fully integrated wet-area module constructed within the steel frame, using moisture-resistant materials and full-height wall linings designed for durability and easy cleaning. All plumbing and drainage are pre-installed to simplify on-site connection.
Full-height bathroom wall system incorporating steel framing, internal waterproof lining, and marble-look wall panels
Integrated wet-area floor with fall to floor waste and slip-resistant PVC flooring
Vanity with ceramic basin, mixer tap, and under-bench storage
Standard flush toilet with concealed plumbing
Framed frosted-glass shower screen with stainless hardware
LED ceiling light with integrated exhaust ventilation
Electric hot water system located within bathroom
Pre-plumbed hot and cold water services
Pre-plumbed waste with dedicated greywater outlet ready for site connection
The SoloX kitchen uses a compact L-shape layout to maintain an open feel while providing practical bench space and storage. Natural light from the window above the sink improves usability, and all services are pre-planned for straightforward appliance connection.
Inclusions:
L-shape kitchen layout
Stone-effect, silica-free benchtop
Integrated sink with mixer tap
Wood-grain base cabinetry
Overhead cabinetry for increased storage
Pre-plumbed water and waste
Pre-wired power points
Windows are powder-coated aluminium casement and top-hung units, selected for durability, weather resistance and clean, modern lines. Glazing provides good natural light while maintaining thermal performance and privacy where required.
Powder-coated aluminium frames
Combination of casement and top-hung (awning-style) windows
Fixed bathroom window with obscured glazing for privacy
External access is provided via full-height aluminium-framed glazed double doors.
Dual aluminium-framed swing entry doors forming a glazing effect
Secure locking hardware
Interior timber-look hinged doors with stainless steel lever handles
The DualX is fully pre-plumbed internally, with all wet areas completed in-factory to minimise on-site works and simplify final connection. Plumbing is concealed within wall and floor cavities for a clean finish.
Hot and cold water lines pre-installed to kitchen and bathroom
Kitchen and bathroom fixtures pre-connected
50 mm greywater outlet pre-plumbed from kitchen and shower to a single external discharge point
100 mm toilet waste outlet pre-plumbed via floor connection
Bathroom floor waste with integrated fall
External connection points positioned for straightforward site hookup
Electrical systems are pre-wired and fitted in-factory, ready for licensed connection on site. Layout is designed for everyday residential use, with dedicated circuits to wet areas.
Internal wiring completed to Australian electrical standards
LED ceiling lighting installed throughout
Power points to living, kitchen and bathroom areas
Light switches and exhaust/ventilation controls pre-installed
Bathroom fitted with combined lighting, ventilation and heating unit
2.5 kW reverse-cycle split-system air conditioner installed
Wall-mounted air conditioning controller
External power inlet provided for main electrical connection
